Wet fly ash rotary diesel fuel dryer 6210
Unique special features-Wet fly ash rotary diesel fuel dryer 6210
European Standards: three layers design- inner layer, middle layer and outside layer;
It use anti- resisting High Manganese Steel Q345, improve its working life;
Drying result is nice, the moisture ratio after drying is reduced below 0.5%;
Compared with traditional design, it can save more than 40% thermal efficiency;
Working site can save 60% area, compared with traditional single layer dryer;
Perfect sealing system avoid thermal energy losing;
The output material temperature after drying is below 60 C, it can be used directly, no need to take time to cool
Save Fuel: compared with traditional single layer dryer, it save coal 2/3, save electricity 40%.
Main parameters-Wet fly ash rotary diesel fuel dryer 6210
Model | Capacity (m3/h) | Moisture after drying (%) | Coal consumption (kg/ton of sand) | Main motor power (kw) |
ANT623 | 3m3/h | <0.5% | 7 | 3 |
ANT625 | 5m3/h | <0.5% | 7 | 5.5 |
ANT6210 | 10m3/h | <0.5% | 7 | 7.5 |
ANT6225 | 25m3/h | <0.5% | 7 | 7.5 |
Brief introductions-Wet fly ash rotary diesel fuel dryer 6210
1. Triple-drum rotary drier use telescope-feed structure, dry the material quickly.
2. Simple design, self-insulation, improve the heat efficiency to exceed 80%.
3. Using alloy steel plate, wear 3-4 times
than ordinary steel plate.
4. Good drying performance. coal consumption<8kg when drying 1 t material.
5. The fuel can be coal, oil, natural gas etc, dry mass and granule and powder material.
6. Reduce land area for 50% compared to single drum rotary dryer,so construction investment is saved 50%,power consumption saved 60%.
7. Finished product moisture ensured to be 0.5-1%.
8. Finished product temperature lower than 60℃,packing can be done continuously.Drive by tug not gear and pinion.
Original Zhengzhou factory manufacturer-Wet fly ash rotary diesel fuel dryer 6210
